English
简体中文
双叶静脉针组装机 Double-leaf Intravenous Needle Assembly Machine
设备配置
设备采用基恩士编程控制系统，面板采用触摸屏操作简单方便，伺服电机涂胶机构涂胶过程平稳均匀。检测系统采用日本基恩士CCD影像，气动配置采用进口元件。
Equipment Configuration
The device adopts the Keyence programming control system, and the panel is easy to operate with the touch screen.
The servo motor coating mechanism is smooth and uniform.
The detection system adopts the Keyence CCD image from Japan, and the pneumatic configuration adopts the imported components.
流 程
上双叶片一缺叶片推出一组装针管一压针一涂胶一搓针 1一搓针2一烘箱一CCD 检测刃面一CCD 检测毛刺、倒针一硅化一剃废一上护套一压护套一缺套推出一卸料
Technological process
Double-wing loading—no double-wing zig rejecting—cannula loading—cannula pressing—gluing—cannula rubbing1—cannula rubbing 2—drying in oven—CCD to check bevel of cannula—CCD to check burr and inverted cannula—silicification—unqualified needle rejecting—cap loading—cap pressing—no cap needle rejecting—finished product
设备配置
设备采用基恩士编程控制系统，面板采用触摸屏操作简单方便，伺服电机涂胶机构涂胶过程平稳均匀。检测系统采用日本基恩士CCD影像，气动配置采用进口元件。
Equipment Configuration
The device adopts the Keyence programming control system, and the panel is easy to operate with the touch screen.
The servo motor coating mechanism is smooth and uniform.
The detection system adopts the Keyence CCD image from Japan, and the pneumatic configuration adopts the imported components.
流 程
上双叶片一缺叶片推出一组装针管一压针一涂胶一搓针 1一搓针2一烘箱一CCD 检测刃面一CCD 检测毛刺、倒针一硅化一剃废一上护套一压护套一缺套推出一卸料
Technological process
Double-wing loading—no double-wing zig rejecting—cannula loading—cannula pressing—gluing—cannula rubbing1—cannula rubbing 2—drying in oven—CCD to check bevel of cannula—CCD to check burr and inverted cannula—silicification—unqualified needle rejecting—cap loading—cap pressing—no cap needle rejecting—finished product
设备参数 Equipment parameters
| 产量/Production capacity | 1万只每小时/10000 pcs per hour |
| 设备功率/Equipment power | 20KW |
| 耗气量/Gas consumption | 60立方每小时/60 cubic per hour |
| 额定气压/Rated pressure | ＞0.5MPa |
| 重量/Equipment weight | 约8吨/About 8 tons |
| 占地面积/Equipment size | 12米*5米/12m*5m |
| 操作人员/Operators | 2—3人/2-3 persons |