English
简体中文
单叶片静脉针组装机 Single Blade Venous Needle Assembly Machine
设备配置
设备采用基恩士编程控制系统，面板采用触摸屏操作简单方便，伺服电机涂胶机构涂胶过程平稳均匀。检测系统采用日本基恩士CCD影像，气动配置采用进口元件。
Equipment Configuration
The device adopts the Keyence programming control system, and the panel is easy to operate with the touch screen.
The servo motor coating mechanism is smooth and uniform. The detection system adopts the Keyence CCD image from Japan, and the pneumatic configuration adopts the imported components.
流 程
组装叶片→组装针管→涂胶（环氧树脂胶）搓针1→搓针2→烘干→检堵→CCD检测针尖毛刺、倒针→硅化→剃废→上护帽
→压护帽→下料
Technological process
Assembly blade → assembly needle tube → glue coating (epoxy resin glue) → twirl the needle 1 → twirl the needle 2
→ drying → jam detection → CCD detection of needle tip burr, inverted needle → silicification → waste shaving
→ put on protectivecap → press protective cap → laying-off
设备配置
设备采用基恩士编程控制系统，面板采用触摸屏操作简单方便，伺服电机涂胶机构涂胶过程平稳均匀。检测系统采用日本基恩士CCD影像，气动配置采用进口元件。
Equipment Configuration
The device adopts the Keyence programming control system, and the panel is easy to operate with the touch screen.
The servo motor coating mechanism is smooth and uniform. The detection system adopts the Keyence CCD image from Japan, and the pneumatic configuration adopts the imported components.
流 程
组装叶片→组装针管→涂胶（环氧树脂胶）搓针1→搓针2→烘干→检堵→CCD检测针尖毛刺、倒针→硅化→剃废→上护帽
→压护帽→下料
Technological process
Assembly blade → assembly needle tube → glue coating (epoxy resin glue) → twirl the needle 1 → twirl the needle 2
→ drying → jam detection → CCD detection of needle tip burr, inverted needle → silicification → waste shaving
→ put on protectivecap → press protective cap → laying-off
设备参数 Equipment parameters 产 量/Output 2.8万只每小时/25,000 pieces per hour 耗气量/Gas consumption 60立方每小时/60 cubic meters per hour 整机功率/Whole machine power
18KW
额定气压/Rated pressure ＞0.6MPa 设备尺寸/Equipment size 11米*3.5米/11m*3.5m 设备重量/Equipment weight 约6吨/About 6 tons 操作人员/Operators 2—3人/2-3 persons