English
简体中文
留置针组装机 Indwelling Needle Assembly Machine
设备配置
设备采用基恩士编程控制系统，面板采用触摸屏操作简单方便，伺服电机涂胶机构涂胶过程平稳均匀。检测系统采用日本
基恩士CCD影像，气动配置采用进口元件。
Equipment Configuration
The device adopts the Keyence programming control system, and the panel is easy to operate with the touch screen.
The servo motor coating mechanism is smooth and uniform. The detection system adopts the Keyence CCD image
from Japan, and the pneumatic configuration adopts the imported components.
流程
上针座→组装针管→涂胶（UV胶）→搓针1→搓针2→紫外线烘箱→检堵→CCD检测毛刺、倒针→硅化→剃废→上软管
→上外套→压套→卸料
Technological process
Assemble needle seat →assembly needle tube →glue coating (UV glue) →twirl the needle 1→twirl the needle2
→ultraviolet oven →jam detection →CCD detection of burrs and inverted needle →silicification →waste shaving
→assemble hose →assemble sleeve →press sleeve →unload
设备配置
设备采用基恩士编程控制系统，面板采用触摸屏操作简单方便，伺服电机涂胶机构涂胶过程平稳均匀。检测系统采用日本
基恩士CCD影像，气动配置采用进口元件。
Equipment Configuration
The device adopts the Keyence programming control system, and the panel is easy to operate with the touch screen.
The servo motor coating mechanism is smooth and uniform. The detection system adopts the Keyence CCD image
from Japan, and the pneumatic configuration adopts the imported components.
流程
上针座→组装针管→涂胶（UV胶）→搓针1→搓针2→紫外线烘箱→检堵→CCD检测毛刺、倒针→硅化→剃废→上软管
→上外套→压套→卸料
Technological process
Assemble needle seat →assembly needle tube →glue coating (UV glue) →twirl the needle 1→twirl the needle2
→ultraviolet oven →jam detection →CCD detection of burrs and inverted needle →silicification →waste shaving
→assemble hose →assemble sleeve →press sleeve →unload
设备参数 Equipment parameters
|
产 量/Output |
6千只每小时/6,000 pieces per hour |
|
耗气量/Gas consumption |
60立方每小时/60 cubic meters per hour |
|
整机功率/Whole machine power |
15KW |
|
额定气压/Rated pressure |
＞0.6MPa |
|
设备尺寸/Equipment size |
15.5米*6米/15.5m*6m |
|
设备重量/Equipment weight |
约8吨/About 8 tons |
|
操作人员/Operators |
3---4人/3 - 4 persons |